StretchFit 2.0 by DEXFUZE
DEXFUZE® lamination technology
These DexFuze waterproof gloves features single layer composite fabric, offering superb dexterity and grip control in wet conditions, without any 'liner slippage' hassle. Attached a “wrist leash” to avoid dropping piece of gloves when wearers take them off in the backcountry.
FIND YOUR SIZE
Thermal Rating: 3
| Features | Seamless knit merino wool Inner. Ergonomic cut glove outer component. 3-layer totally laminated with membrane sandwiched. Dexterous and stretchy fit. |
| Recommended | 0°C~10°C / 32°F~50°F Depends on the individual variation of sensitivity to the temperature. |
| Outer shell | Palm: 64% Viscose, 32% Nylon, 4% Elastane Back: 98% Polyamide, 2% Elastane Cuff: 92% Polyamide, 8% Elastane |
| Knit inner | 39% Merino wool 40% Acrylic 19% Polyamide 2% Elastane |
| Interlining | Porelle® membrane (PFOA free polyurethane) Waterproofness: 15,000 mm hydrostatic head (JIS L1092 Method A) Breathability: Water Vapor Permeability 15,000 g/m²/day (ASTM E96:95) Viral Penetration: Passed as per ISO 16604 (Nelson Labs Ref. 1298748-S01) |
-
Waterproof
-
Breathable
-
Touchscreen Applicable
DexFuze® is our proprietary single-layer lamination technology, engineered to eliminate the bulk and stiffness found in traditional multi-layer waterproof gloves. By fusing the waterproof barrier directly into the glove structure, DexFuze® provides a slimmer, more flexible fit with excellent grip and hand mobility – all while keeping your hands protected in wet, windy conditions.
Frequently Asked Questions
Q: Why choose waterproof DEXFUZE gloves?
A: DexFuze® technology fuses the waterproof membrane directly into the glove structure, eliminating the usual bulky multi-layer build. This means no slipping layers, no bunching, and no loss of control — just a slim, lightweight glove that stays fully waterproof while keeping your hands comfortable and agile.
Q: What temperature are your gloves suitable for?
A: We recommend using our waterproof knit gloves for temperatures 0°C and 10°C (32°F to 50°F), and our waterproof DEXFUZE gloves for -5°C and 5°C (23°F to 41°F). However, the actual experience may vary depending on individual sensitivity to temperature.
Q: Are your waterproof gloves made with water-repellent outer shells?
A: No. The waterproof feature is due to the membrane insert laminated in between. We do not apply a water-repellent treatment to the glove outers.
Q: What size should I choose?
A: We suggest you paying attention particularly to your middle finger length and comparing it with the number provided on our size chart. Note the measurement could be slightly variant in 1 cm.
Q: How to care for and clean?
A: Maximum washing temperature 30°C (86°F), normal process. You can use any common detergents available in the supermarket. Please KEEP AWAY FROM ANY DIRECT HEAT WHEN DRYING such as radiator or fireplace etc, or the fabric would be delaminated.
Comparison Chart
| Waterproof Barrier | Porelle Membrane | Porelle Membrane | Porelle Membrane | Porelle Glove Insert |
| Inner Lining | Merino Wool Flat Knit | Merino Wool Flat Knit | Merino Wool Terry Loop Knit | Fleece Inner Glove |
| Outer Material | Anatomically Cut & Sewn Fabric | Knitted Nylon Blend | Anatomically Cut & Sewn Fabric | Anatomically Cut & Sewn Fabric |
| Construction | 3-layer Laminated | 3-layer Laminated | 3-layer Laminated | Multi-Layer Build with Insulation |
| Fit Reference | Slim & Natural Hand Articulation | Close Fitting & Flexible | Slim & Natural Hand Articulation | Insulated Protective Fit |
| Touchscreen Compatibility | Conductive Fabric Panel | Conductive Knitted Fingertips | Conductive Fabric Panel | Conductive Fabric Panel |
| Recommended Temperature | 0°C~10°C (32°F~50°F) | 0°C~10°C (32°F~50°F) | -5°C~5°C (23°F~32°F) | -15°C~0°C (5°F~32°F) |
